เรือ DDG 1000 ลงน้ำอย่างเงียบๆ โดยไม่มีพิธีการ จากกำหนดเดิมที่จะมีพิธีปล่อยเรือลงน้ำเมื่อวันที่ 19 ต.ค.ที่ผ่านมาแต่ต้องเลื่อนออกไปเนื่องจากปัญหา Government Shutdown ของสหรัฐฯ โดยอู่ต่อเรือ Bath Iron Works จะดำเนินการติดตั้งระบบต่างๆ ในเรือต่อไปเพื่อให้ส่งมอบเรือได้ทันตามกำหนดเวลาและจะมีกำหนดพิธีปล่อยเรือลงน้ำอย่างเป็นทางการอีกครั้งในช่วงต้นปีหน้า
รายละเอียดเพิ่มเติม https://www.facebook.com/kapitaennem0/posts/607256439330666
โห ปืนใหญ่พี่แกเงยได้สูงมาก เกือบ 90 องศาเลยมั้งนั้่น
มาแบบโคตรเงียบเลย สงสัยเงินหมดงดจัดงานเปิดตัว
Oct 21, 2013By Christopher P. Cavasin Acquisition,Navy, New Tech,Shipbuilding6 Comments
The destroyer Zumwalt is one of the most strikingly different warships ever built, in any age. Angular and stealthy, the ship’s lines are almost as different from other destroyers as the Monitor and Virginia/Merrimac were from the sailing ships of their era. In some ways, the Zumwalt’s silhouette actually harkens back to Confederate-built Civil War-era ironclads, as well as the North’s Dunderberg.
The Zumwalt’s formal christening party scheduled for Oct. 19 has been postponed due to the government shutdown, but the shipbuilders up at Bath Iron Works continue to ready the ship for launching, likely to take place before the month is out.
These images were released Oct. 15 and 16. All photos courtesy US Navy/General Dynamics Bath Iron Works, photography by Michael C. Nutter.
Earlier posts featuring the Zumwalt:
Mighty Zumwalt is coming together
Biggest pieces of Zumwalt come together in the night
Zumwalt deckhouse makes unplanned stop in Norfolk
The Zumwalt seen from one the shipyard’s cranes. Astern of the ship is the midbody of the Michael Monsoor (DDG 1001, for which a keel laying ceremony was held in May.
The ship is resplendent in new paint, put on for the christening ceremony that had been scheduled for Oct. 19, and now postponed due to the government shutdown.
The ship rests on a wheeled system that can “translate,” or move the hull from the land-level building facility into a floating drydock, from which it will be launched.
The ship’s tumblehome hull is plainly visible in this sharp bow view. Unlike more conventional hull forms, the tumblehome hull is fuller and wider at the waterline and below than above. The ship’s maximum beam is 80.7 feet on a length of 600 feet.
Mount 61 is open and displaying its 155 mm weapon. Mount 62 behind it is closed up. The Advanced Gun System is one ten major newly-developed technologies in the DDG 1000 design. Flanking the guns are the launch cells of the Peripheral Launch System, another new technology that moves the ship’s missiles from the centerline to the edge of the hull, where they also form part of the ship’s protective system.
The superstructure is virtually devoid of masts and projections. All sensors are embedded in the superstructure and hull.
A closeup of the forward superstructure. The bridge is on the lower levels; while there is only one set of windows, the interior is actually a unique two-level arrangement.
The exceptionally narrow forward hull body is intended to slice through waves, damping down pitch action to enhance low-level signature qualities.
A painter touches up the bow.
Although there will be only three ships in the class, the DDG 1000s represent a major leap in multiple technology arenas.
The Zumwalt is in the midst of receiving a new paint job before she’s launched. (General Dynamics Bath Iron Works photo)
This view taken June 20 emphasizes the ship’s sharp bow. (General Dynamics Bath Iron Works photo)
http://blogs.defensenews.com/intercepts/2013/10/latest-pics-of-zumwalt-ddg-1000/